Facelift Infiltration Cannula – Lums Compatible

The Lums Compatible Facelift Infiltration Cannula is a blunt-tip, side-ported cannula with a hub built to fit Lums machine handpieces, used to deliver tumescent or wetting solution into subcutaneous tissue before facelift dissection, liposuction, or fat grafting. The shaft, blunt tip and port pattern are the same as the rest of the Healermed infiltration range; only the connection is machined for the Lums machine. It is supplied to aesthetic surgery centers and in bulk to distributors worldwide. See the full Facelift Infiltration Cannulas range for other fittings.

Buyers also search for this instrument as a Lums machine cannula, a system-compatible infiltration cannula, or a machine-fit infiltrator cannula.

Lums Machine Compatible Infiltration Cannula in German Stainless Steel

Equipment-specific hubs exist because handpiece manufacturers do not share a common fitting. A cannula that fits one machine will not seat in another, and forcing or adapting a fitting introduces play at exactly the point that carries mechanical load. Ordering the correct hub for your machine is the only safe route.

Key Features

• ✔ Hub machined to fit Lums machine handpieces
• ✔ Closed blunt distal tip with side ports for even solution spread
• ✔ Full size grid from 1.0mm x 4cm up to 6.0mm x 35cm
• ✔ German stainless steel construction, fully reusable
• ✔ Same shaft and port geometry as the rest of the Healermed range
• ✔ Custom diameters, lengths and port patterns available on request

Specifications

Clinical Applications

• Tumescent infiltration of the face, neck and body using a Lums machine handpiece
• Facelift and submental infiltration
• Liposuction preparation
• Fat grafting donor site infiltration

Material and Sterilization

The cannula is German stainless steel with a passivated, corrosion-resistant surface. It is reusable and steam autoclavable to 134°C. Flush the lumen and side ports immediately after use and dry fully before sterilization. Inspect the hub for wear or play before each case, since a machine-mounted fitting carries load that a syringe hub does not.

How to Choose

Order this fitting only if your handpiece takes it. Send us your machine and handpiece details before placing a large order so we can confirm the hub matches. If you infiltrate from a syringe or a manual handle, choose the Luer lock or fixed handle version instead. Diameter and length selection is unchanged: 1.0mm to 1.5mm in 5cm to 12cm for facial work, 1.8mm to 2.5mm in 15cm to 25cm for neck and small body areas, 3.0mm and above for large-volume body infiltration.

Why Buy Direct From the Manufacturer

Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.

Trademark notice: All third-party equipment names are the property of their respective owners. Healermed Instruments is not affiliated with, endorsed by, or sponsored by any third-party equipment manufacturer. This cannula is independently manufactured and the compatibility reference is provided for the buyer's guidance only.

Related Instruments

Other fittings in the same cannula range:

• Facelift Infiltration Cannula – MicroAire PAL Compatible
• Facelift Infiltration Cannula – Fixed Power Handle
• Facelift Infiltration Cannula – Threaded Fitting
• Facelift Infiltration Cannulas – All Fittings

Frequently Asked Questions

What is a Lums compatible infiltration cannula used for?

It is used to infiltrate tumescent or wetting solution into subcutaneous tissue when the cannula mounts into a Lums machine handpiece rather than a syringe. The blunt tip and side ports work exactly as on a manual cannula; only the connection is machined for that equipment.

What is the difference between a machine-compatible hub and a Luer lock hub?

A Luer lock is a standardised fitting that works across syringe and tubing brands. A machine-compatible hub is machined to one manufacturer's handpiece and will not fit anything else. Choose the machine hub only if you own that equipment; otherwise the Luer lock version is far more flexible.

Is this cannula autoclavable?

Yes. The instrument is fully reusable and can be steam autoclaved at 134°C. Flush the lumen and every side port with clean water immediately after use, remove all residue before sterilization, and dry completely. Inspect the hub for wear at each cycle, as machine-mounted fittings carry mechanical load.

What is the minimum order quantity for bulk orders?

The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes and quantities you need through the wholesale request page and we will confirm the minimum for that specification. This lets a small distributor start with a trial order and a larger importer scale up on the same terms.

Do you provide samples?

Yes. Samples are available on request and the buyer covers the shipping charges. Send us your machine details with the diameter and length you want to evaluate, and we will confirm what can be sent. Testing a sample in your own handpiece before a bulk order is strongly recommended for any machine-mounted fitting.

Can I order a custom size?

Yes. Custom diameters, working lengths, and port patterns are available on request in addition to the standard size grid. Send your machine details and specification through the wholesale request page and our production team will confirm what can be produced. Custom branding is also available for distributor and OEM orders.