Related Instruments
Liposuction Cannulas and Accessories › Quick Shop Liposuction Cannulas
Quick Shop Liposuction Cannulas
Every liposuction cannula pattern on one page · pick the size and fitting on the product
Fifty liposuction cannulas, one product per pattern, all on a single page. Each listing carries the full size grid and every hub fitting that pattern is made in, so a whole tray can be ordered without working through the range family by family.
This is the page to use when you already know the patterns you want. If you are still deciding, the full liposuction cannulas range explains what each one does in a case.
At a Glance
- Products: 50 liposuction cannula patterns, one listing each
- On each listing: Full diameter and length grid, plus every available hub fitting
- Covers: Infiltration, harvesting, aspiration, shaping, dissection and fat injection
- Material: German stainless steel, fully reusable, autoclavable to 134°C
- Ordering: Buy online at factory-direct prices, or request bulk and OEM pricing
- Manufacturer: Healermed Instruments, Sialkot, Pakistan
All 50 Liposuction Cannulas, Grouped by What They Do
Grouped by stage of the case rather than alphabetically, because that is how a tray is actually assembled: something to infiltrate with, something to remove or harvest with, something to release fibrous tissue, something to shape with, and something to place graft with.
Infiltration Cannulas
| Tumescent Infiltration Liposuction Cannula Delivers tumescent fluid evenly before aspiration begins. |
Tumescent Bayonet Infiltration Cannula Bayonet shaft keeps hand and sightline clear of the entry port. |
| Tumescent Angled Infiltration Cannula Angled shaft reaches planes a straight infiltrator cannot. |
Facelift Infiltration Cannula Fine calibres for face and neck, where the layer is thin. |
Harvesting Cannulas
| Speed Harvester One End Sharp Cannula Cuts on the forward stroke only, travels back without taking more. |
Multi Port Harvester Both End Bevel Cannula Beveled ports lead fat in rather than shearing it. |
| Speed Harvester Both End Sharp Cannula Cuts on both strokes, fastest clearance in fibrous donor sites. |
Multi-Port Aspiration Cannulas
| Mercedes Tip Liposuction Cannula Three balanced ports at 120° — tracks straight through long passes. |
Double Mercedes Six Port Liposuction Cannula Two Mercedes groups, longer aperture, wider lane per pass. |
| Accelerator Three Port Liposuction Cannula Graded port sizes so all three draw at an even rate. |
Three Port In Line Liposuction Cannula Three openings in line for directed removal. |
| Bi-Port Liposuction Cannula Two ports — controllable draw for shaping work. |
Two Square Ports In Line Liposuction Cannula Square openings present a defined straight edge. |
| Five Port Crescent Hole Liposuction Cannula Crescent openings draw evenly in several directions. |
Six Oval Port Liposuction Cannula Six oval openings, high flow for debulking. |
| 3 Spiral Port Liposuction Cannula (Carraway Style) Spiral placement so no two ports sit in line. |
6 Spiral Port Liposuction Cannula Six spiral ports — higher flow, same distributed draw. |
| One Central Port Two Parallel Ports Cannula Central opening leads, parallel pair follows along the shaft. |
Two Parallel Ports One Central Port Cannula Parallel pair leads, central port follows — the order reversed. |
Single and Low-Port Shaping Cannulas
| Standard Single Hole Liposuction Cannula One opening — least taken per pass, for final shaping. |
Oval Hole On Top Liposuction Cannula A single oval opening facing up, so the plane is chosen. |
| Beveled Hole On Top Liposuction Cannula Beveled rim leads tissue in for a smoother low-volume draw. |
Long Hole Fat Aspiration Tip Cannula Extended opening, fat enters over a longer stretch. |
| Lancet Tip One Central Hole Cannula Lancet profile parts tissue; one central opening behind it. |
Tapered Tip Single Central Hole Cannula Taper enters the plane with less force, single measured opening. |
| Tapered Tip Two Spiral Holes Cannula Tapered entry with two spiral openings. |
Tip Pattern Cannulas
| Pyramid Hole Liposuction Cannula Pyramid-set openings draw from several faces at once. |
Reverse Pyramid Liposuction Cannula Openings face back along the shaft, taking tissue on withdrawal. |
| Cobra Style Two Port Liposuction Cannula Flattened cobra head holds its plane; two controlled ports. |
Cobra Style Round Tip Liposuction Cannula Rounded cobra profile for superficial work and thin tissue. |
| Stevens Style Liposuction Cannula One long hole, a Mercedes group and four round ports in one shaft. |
Candy Cane Liposuction Cannula Curved shaft that follows a contour rather than crossing it. |
| Deep Cut Liposuction Cannula Deeper opening profile for the deep fat layer. |
Becker Basket Liposuction Cannula Open cage section — largest draw area at a given diameter. |
| Double Basket Becker Liposuction Cannula Two cage sections, the fastest debulking cannula in the range. |
Double Long Port Liposuction Cannula Two extended openings, high flow with fewer edges. |
| Field Flap Liposuction Cannula Elevated leading edge exposes tissue for mandible and submental work. |
Dissector Cannulas
| Deep Sharp Cut Dissector Liposuction Cannula Releases fibrous bands and scarred planes. |
Toledo V-Dissector Liposuction Cannula Blunt V tip pre-tunnels a route before aspiration. |
| Flap Dissector Liposuction Cannula Broad flattened head opens a plane across its full width. |
Fat Injector Cannulas
| Sharp Hole On Tip Extractor Injector Cannula Sharpened tip opening for extracting and placing small-volume graft. |
Blunt Hole On Tip Extractor Injector Cannula The same opening, blunt, for superficial planes. |
| Blunt Single Hole Injector Cannula One blunt opening for a fine, even thread of fat. |
Two Holes In Line Injector Cannula Two openings place graft over a longer stretch per withdrawal. |
| Sharp Cut Dissector Injector Cannula Releases a tight pocket and injects through the same instrument. |
Tapered Tip Single Central Hole Injector Cannula Tapered entry with one central opening for controlled placement. |
| Long Hole Fat Aspiration Injector Cannula Extended opening lays graft at a steadier rate. |
Coleman Injector Cannula The standard structural fat grafting injector. |
| Coleman Spoon Tip Injector Cannula Scooped tip holds a shallow plane and directs graft to one side. |
Little Round Hole Injector Cannula Small round opening for the finest grafting. |
Choosing Size and Fitting on the Product Page
Every listing above opens with the full size grid for that pattern. Diameter decides how much tissue moves per pass and fitting decides what the cannula mounts into — both are selected on the product, not here.
As a starting point: 3.0mm to 5.0mm at 25cm to 35cm covers abdomen, flanks, back and thighs; 2.0mm to 3.0mm at 15cm to 25cm covers arms, neck and the submental area; and fat injection calibres run finer again, because the recipient plane sets the limit rather than the donor site. Match the hub to the syringe, vacuum line or handpiece already in your theatre.
Material and Sterilization
Every liposuction cannula is made from German stainless steel with a passivated surface that resists corrosion through repeated cleaning cycles. All instruments are fully reusable and steam autoclavable to 134°C. Flush the lumen and every port immediately after use, before fat and tumescent residue set inside the shaft, and confirm water runs from each opening before drying. Inspect the port edges and the hub thread at every cycle: a dulled edge tears fat rather than cutting it, and a worn hub leaks under vacuum. Neither failure is visible from outside, which is why the check matters more on a cannula than on a solid instrument.
|
Buy online Factory-direct pricing, straight from the manufacturer. |
Wholesale & OEM Distributor, importer or hospital group? Bulk pricing, OEM manufacturing and custom branding. |
Contact Healermed Instruments
| Manufacturer Healermed Instruments Surgical instruments manufacturer and exporter Sialkot, Pakistan |
Certifications FDA CGMP · ISO 13485 ISO 9001 · CE Mark German stainless steel throughout |
| Retail buyers Surgeons and clinics order online at factory-direct prices. Worldwide shipping, samples available on request. |
Wholesale buyers Distributors, importers and hospital groups: send your specification and quantities for bulk pricing, OEM manufacturing and custom branding. |
Why Buy Liposuction Cannulas Direct From the Manufacturer
Healermed Instruments manufactures every liposuction cannula in this range at its own facility in Sialkot, Pakistan, and ships worldwide. Buying direct removes the importer and distributor layer that sits between most surgeons and the factory, which is where the majority of the price on an imported cannula comes from. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.
More From the Liposuction Range
| Complete Sets for Liposuction Cannulas Procedure-built sets for face, breast and buttock fat transfer. |
| Accessories For Liposuction Handles, trocars, skin ports, syringes, stands, decanting and nanofat equipment. |
Frequently Asked Questions
What is the difference between this page and the main range?
This page lists one product per liposuction cannula pattern so you can order quickly across the whole range. The main range splits each pattern into its own category, with every hub fitting as a separate product and a full explanation of what that cannula does.
Do I choose the size here or on the product page?
On the product page. Each listing carries the complete diameter and working length grid for that pattern, along with every hub fitting it is made in.
Which liposuction cannula should I start with?
Most trays start with an infiltration cannula, a multi-port working cannula such as a Mercedes tip, and a single-hole or low-port cannula for shaping. Add a dissector if you work on revision or fibrous cases, and injectors if you are grafting rather than only removing.
Are all 50 patterns available in every fitting?
Most are made in up to thirteen hub fittings, including Luer lock, Super Luer lock, threaded, power handles, 60cc Toomey and machine-specific hubs. The fittings available for each pattern are shown on its own product page.
Can I order a custom size or port pattern?
Yes. Custom diameters, lengths, port patterns and hub fittings are manufactured to specification. Send the details through the wholesale request page and our production team will confirm what can be produced.
Do you ship worldwide?
Yes. Healermed Instruments manufactures in Sialkot, Pakistan and ships worldwide to surgeons, clinics, distributors and hospital groups. Samples are available on request with shipping covered by the buyer.
