Cobra Style Two Port Liposuction Cannula

The Cobra Style Two Port Liposuction Cannula is a blunt-tip aspiration cannula with two side ports, used to remove subcutaneous fat under vacuum during liposuction and body contouring. Two ports rather than many gives a slower, more controlled draw, which is what superficial work, feathering and revision cases need. It sits in the Cobra Style Two Port Liposuction Cannulas category, part of the wider Healermed Liposuction Cannulas and Accessories range, and is supplied in 11 hub and handle fittings and 84 diameter and length combinations worldwide.

Surgeons also refer to these instruments as Cobra tip cannulas, two-hole liposuction cannulas, dual port aspiration cannulas, or double hole lipo cannulas.

Two Port German Stainless Steel Cannula for Controlled Fat Removal

Liposuction results are not decided by how fast fat comes out. They are decided by whether the surgeon can stop at the right point, and that depends on the instrument giving feedback at a rate the hand can respond to. A high-port cannula clears volume quickly but the contour changes faster than the eye can check it. A two-port cannula is the tool for the part of the case where that trade-off runs the other way.

Why Two Ports

Port count is the main lever a surgeon has over how aggressive a cannula behaves. More ports remove fat faster but take it from many points at once, which makes an even result harder to control in a thin or superficial layer. Two ports move less per pass, and that is the point: the surgeon can see the contour change gradually and stop at the right moment instead of overshooting.

Two ports also make the draw predictable. With a single hole the whole vacuum load sits at one opening and the cannula can grab; with many holes the flow splits in ways that vary with how the shaft is angled in the tissue. Two openings on a Cobra style shaft give a balanced draw that behaves the same on each pass, which is what makes feathering and edge blending repeatable rather than lucky.

The distal tip is closed and rounded. It separates the plane by blunt dissection as the cannula advances, pushing vessels and nerves aside rather than dividing them, and the vacuum works through the side ports rather than the end of the shaft.

Key Features

• ✔ Two ports for controlled, even fat removal rather than fast bulk clearance
• ✔ Balanced draw that behaves the same on every pass, so feathering is repeatable
• ✔ Closed blunt tip separates the plane without cutting vessels or nerves
• ✔ Deburred port edges for clean passage through fat
• ✔ 84 diameter and length combinations, from 1.0mm x 4cm to 6.0mm x 35cm
• ✔ 11 hub and handle fittings covering syringe, vacuum line and power-assisted systems
• ✔ Custom diameters, lengths and port configurations available on request

Available Fittings

Specifications

Clinical Applications

• Superficial liposuction and contour refinement where control matters more than speed
• Feathering and edge blending at the border of a treated area
• Arm, neck and submental contouring with the shorter, smaller-diameter sizes
• Secondary and revision liposuction, where small corrections are the whole job

Material and Sterilization

The cannula is made from German stainless steel with a passivated surface that resists corrosion and pitting through repeated cleaning cycles. It is reusable and can be steam autoclaved at 134°C. Flush the lumen and both ports with clean water immediately after use and dry fully before autoclaving. Check the port edges under light at each cycle: on an aspiration cannula the edge finish is what decides how cleanly fat parts from tissue, and a nicked or dulled edge changes how the instrument behaves.

How to Choose

Diameter sets how much fat comes out per pass and length sets the reach. For general body contouring of the abdomen, flanks and thighs, the 3.0mm to 4.0mm diameters in 25cm to 35cm are the usual working range. The 2.0mm to 2.5mm range in 15cm to 25cm suits arms, the neck and superficial refinement, which is where a two-port cannula is most often chosen. The 1.0mm to 1.5mm diameters in 5cm to 12cm are for fine facial and submental work. Match the fitting to the syringe, vacuum line or handpiece already in your theater.

Why Buy Direct From the Manufacturer

Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.

Related Instruments

Choose the fitting that matches your equipment:

• Cobra Style Two Port Liposuction Cannula – Luer Lock
• Cobra Style Two Port Liposuction Cannula – Stainless Steel Luer Lock
• Cobra Style Two Port Liposuction Cannula – Super Luer Lock
• Cobra Style Two Port Liposuction Cannula – Threaded Fitting
• Cobra Style Two Port Liposuction Cannula – Fixed Power Handle
• Cobra Style Two Port Liposuction Cannula – Grooved Power Handle
• Cobra Style Two Port Liposuction Cannula – Black Power Handle
• Cobra Style Two Port Liposuction Cannula – Toomey Hub, 60cc
• Cobra Style Two Port Liposuction Cannula – MicroAire PAL Compatible
• Cobra Style Two Port Liposuction Cannula – Lumsail Compatible
• Cobra Style Two Port Liposuction Cannula – Universal Luer Lock
• Cobra Style Two Port Liposuction Cannulas – all fittings

Frequently Asked Questions

What is a Cobra style two port liposuction cannula used for?

It is used to remove subcutaneous fat under vacuum during liposuction and body contouring. Two side ports draw more slowly and more evenly than a multi-port cannula, which suits superficial work, feathering at the edge of a treated area, and revision cases where small corrections are the whole job.

What is the difference between a two-port and a multi-port liposuction cannula?

A two-port cannula has two openings and removes fat more slowly and more evenly; a multi-port cannula has several and clears volume faster. Two ports suit superficial work, refinement and feathering, where control matters more than speed. Multi-port suits bulk debulking of large areas.

Is this cannula autoclavable?

Yes. The instrument is fully reusable and can be steam autoclaved at 134°C. Flush the lumen and both ports with clean water immediately after use, remove all residue before sterilization, and dry completely. Inspect the port edges each cycle, since edge condition on an aspiration cannula affects how it cuts through fat.

What is the minimum order quantity for bulk orders?

The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes, fittings and quantities you need through the wholesale request page and we will confirm the minimum for that specification. This lets a small distributor start with a trial order and a larger importer scale up on the same terms.

Which size should I use?

For general body contouring of the abdomen, flanks and thighs, 3.0mm to 4.0mm diameters in 25cm to 35cm are the usual range. Arms, neck and superficial refinement suit 2.0mm to 2.5mm in 15cm to 25cm, which is where a two-port cannula is chosen most often. Facial and submental work uses 1.0mm to 1.5mm in 5cm to 12cm.

Do you provide samples?

Yes. Samples are available on request and the buyer covers the shipping charges. Tell us the diameter, length and fitting you want to evaluate and we will confirm what can be sent. Testing a sample before a bulk order is the fastest way to check port edge finish and hub fit against your own equipment.

Can I order a custom size?

Yes. Custom diameters, working lengths and port configurations are available on request in addition to the standard size grid. Send your specification through the wholesale request page and our production team will confirm what can be produced. Custom branding is also available for distributor and OEM orders.