Buy Online
Add to Cart Now
Your shopping cart is empty!
Lorem Ipsum is simply dummy text of the printing and typesetting industry.
Globally certified & registered manufacturer
Globally trusted & secured payment methods
Liposuction Cannulas and Accessories › Cobra Style Round Tip Liposuction Cannulas › Vibrasat Quick Lock
The Cobra Style Round Tip Liposuction Cannula with Vibrasat Quick Lock fitting carries the same shaft, openings and tip as every other fitting in the range, with a hub built for that equipment. It is part of the Healermed liposuction cannulas and accessories range.
At a Glance
A quick-lock hub is a quarter-turn coupling rather than a thread. The cannula seats and locks in one movement and releases the same way, so a size change during a case takes a second instead of several turns. On a long case where the surgeon steps through three or four diameters that time adds up, and a coupling that cannot cross-thread removes one way for a swap to go wrong mid-case.
The round tip is a fully domed, closed end with no taper and no edge anywhere on it. That single detail decides how the cannula behaves at the moment of contact: it cannot catch, it cannot start a cut, and it cannot be led off the plane by a firm structure. It pushes tissue aside and lets the surgeon's line of travel decide the direction, rather than the tissue deciding it.
Compare it with a bullet tip. A bullet profile tapers to a narrower nose, which makes it easier to drive through scar and fibrous septa, at the cost of some of that forgiveness. A round tip needs a little more push in dense tissue, and gives back a far lower chance of a septum being divided or the tip skipping into a plane the surgeon did not choose.
That trade favours the round tip wherever the margin for error is smallest. In the superficial layer the skin is close and an irregularity is permanent. Over bony landmarks and near a neurovascular bundle the cost of a tip that catches is not a contour problem. In those places the surgeon wants the most forgiving nose available, and accepts the extra push.
Vacuum works through the side ports, not the end of the shaft. Because the tip itself is sealed, suction never pulls tissue against the leading point, which is what keeps a round-tip cannula from grabbing as it enters.
| Material | German stainless steel |
| Fitting | Vibrasat quick-lock hub — quarter-turn coupling |
| Openings | Side ports on a Cobra style shaft |
| Tip | Fully domed round tip, closed |
| Diameters | 1.0mm (19G), 1.1mm (19G), 1.2mm (18G), 1.4mm (17G), 1.5mm (17G), 1.6mm (16G), 1.8mm (15G), 2.0mm (14G), 2.4mm (13G), 2.5mm (13G), 3.0mm (11G), 3.5mm (10G), 4.0mm (8G), 4.5mm (7G), 5.0mm (6G), 6.0mm (4G) |
| Lengths | 3, 4, 5, 7, 7.5, 8, 9, 10, 12, 14, 15, 20, 25, 30, 35cm (by diameter) |
| Reusable | Yes — steam autoclavable to 134°C |
| Compliance | FDA CGMP, ISO 13485, ISO 9001, CE Mark |
The cannula is made from German stainless steel with a passivated surface that resists corrosion through repeated cleaning cycles. It is reusable and steam autoclavable to 134°C. Flush the lumen and every opening immediately after use, remove all residue before sterilization, and dry completely. Inspect the hub coupling as well as the openings at each cycle, since a worn coupling loses the seal and the alignment the equipment depends on.
Order this fitting only if you own a Vibrasat power-assisted handpiece with quick-lock coupling; the hub will not fit a syringe or a manual handle. The size grid is identical across every fitting in this range.
Buy online |
Distributor, importer, or hospital group? Get bulk pricing, OEM manufacturing, and custom branding on the full range. |
Trademark notice: Vibrasat is a trademark of its respective owner. Healermed Instruments is not affiliated with, endorsed by, or sponsored by that company. This cannula is an independently manufactured instrument and the compatibility reference is provided for the buyer's guidance only.
The same cobra style round tip cannula is made in every fitting below. Pick the one that matches the syringe, vacuum line or handpiece already in your theater.
| Luer Lock Standard Luer lock syringes and suction tubing |
| Stainless Steel Luer Lock All-steel hub for heavy autoclave cycles |
| Super Luer Lock Larger bore, longer thread, heavier hub |
| Threaded Fitting Threaded reusable handles and connectors |
| Fixed Power Handle Integrated handle, permanently attached |
| Grooved Power Handle Grooved grip for wet-glove control |
| Black Power Handle Black anodized, low glare under lights |
| Toomey Hub 60cc 60cc Toomey-tip syringes |
| MicroAire PAL Compatible MicroAire PAL power-assisted handpieces |
| Lumsail Compatible Lumsail machine handpieces |
| Universal Luer Lock Fits Luer lock across syringe brands |
| BeautiFill Laser Compatible BeautiFill laser lipolysis handpieces |
| Cobra Style Round Tip Liposuction Cannula All fittings on one product page |
Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.
What is a cobra round tip vibrasat quick lock cannula used for?
It is used when the cannula mounts into a Vibrasat power-assisted handpiece. The quick-lock coupling seats and releases in a quarter turn, so the surgeon can change diameter mid-case without unthreading a hub. The shaft and openings work exactly as on the manual versions.
Does this fit any other handpiece?
No. Handpiece manufacturers do not share a common fitting, so a hub machined for one system will not seat correctly in another. Adapting or forcing a fitting introduces play at the point that carries mechanical load and holds the seal. Order the hub that matches your equipment.
Is this cannula autoclavable?
Yes. It is fully reusable and steam autoclavable to 134°C. Flush the lumen and every opening immediately after use, and inspect the hub coupling at each cycle.
Do you provide samples?
Yes. Samples are available on request and the buyer covers the shipping charges. Send us your handpiece details with the diameter and length you want to evaluate. Testing a sample in your own handpiece before a bulk order is strongly recommended for any powered fitting.
What is the minimum order quantity for bulk orders?
The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes, fittings and quantities you need through the wholesale request page and we will confirm the minimum for that specification.