Both End Sharp Liposuction Cannula – Black Power Handle

Liposuction Cannulas and Accessories › Multiport Speed Harvester Both End Sharp Liposuction Cannulas › Multiport Speed Harvester Both End Sharp Liposuction Cannula – Black Power Handle

The Multiport Speed Harvester Both End Sharp Liposuction Cannula with Black Power Handle fitting is a multiport speed harvester with both port ends sharp is a fat harvesting liposuction cannula whose ports are sharpened at both their leading and trailing ends, so parcels are cut on the forward stroke and on the return. It is listed under Multiport Speed Harvester Both End Sharp Liposuction Cannulas, part of the Healermed Liposuction Cannulas and Accessories range.

Surgeons also search for these liposuction cannulas as fat harvesting cannulas, fat transfer cannulas, fat grafting cannulas, or multiport harvester cannulas.

Multiport Speed Harvester Both End Sharp Liposuction Cannula — Black Power Handle

Operating lights are bright and directional, and a polished steel handle reflects them straight back at the surgeon. An anodized black handle removes that reflection at the point closest to the eye line, and colour-codes this pattern against the others on a busy tray.

What Sharpening Both Port Ends Does

This is a fat harvesting cannula, and the ports are what make it one. Each opening is sharpened at both its leading and its trailing end, so an edge meets tissue whichever way the cannula is moving.

Harvesting is a reciprocating action: the surgeon pushes forward and draws back, repeatedly, filling a syringe or canister. On a cannula with plain port edges only the vacuum separates the fat, and the return stroke contributes little. With both ends sharpened, parcels are cut on the forward stroke and again on the return, so every complete movement of the hand does harvesting work.

That roughly doubles the useful strokes in a given time, which is why this specification exists and why it is the one chosen when a large graft volume has to be collected before the case moves on. On a high-volume transfer the difference is measured in minutes at the donor site.

The trade is that sharp edges cut whatever reaches them. There is less scope to feel a fibrous band and ease around it, because the edge has already divided it. This specification suits an even, fatty donor site worked by a surgeon who wants throughput. For a fibrous or previously operated donor site, or where a gentler cut is preferred, the one-end-sharp or beveled versions give more control per pass. The distal tip is closed and rounded and does not cut; the sharpened edges are on the ports only.

Key Features

• ✔ Black anodized handle reduces reflected glare under operating lights
• ✔ Ports sharpened at both ends, so the forward and return strokes both harvest
• ✔ Roughly doubles the useful strokes in a given time at the donor site
• ✔ Built for large graft volumes collected before the case moves on
• ✔ Closed blunt tip — the sharpened edges are on the ports only, not the nose
• ✔ One-piece German stainless steel shaft, fully reusable and autoclavable
• ✔ Custom diameters, lengths and port configurations available on request

Specifications

Clinical Applications

• High-volume fat harvesting for gluteal and body fat transfer
• Even, fatty donor sites where throughput is the priority
• Abdomen, flanks and thighs as donor areas with the 3.0mm to 4.0mm diameters
• Syringe harvesting with the Toomey hub fitting

Material and Sterilization

The cannula is made from German stainless steel with a passivated surface that resists corrosion and pitting through repeated cleaning cycles. It is reusable and can be steam autoclaved at 134°C. Flush the lumen and the opening with clean water immediately after use and dry fully before autoclaving. Every port carries two sharpened edges, so there are twice as many surfaces to inspect as on a single-edge harvester. Check each edge under magnification at every cycle; a dulled edge stops cutting and starts tearing, which is worse than a plain port. Flush until the water runs clear, since sharpened ports hold tissue at the corners.

How to Choose

Choose the black handle for glare reduction or tray colour-coding; the shaft, opening and tip are identical to the other handle versions. If your cleaning protocol uses aggressive chemical agents, a plain steel handle will hold its appearance longer. Diameter sets how much comes out per pass and length sets the reach. For high-volume harvesting from the abdomen, flanks and thighs, the 3.0mm to 4.0mm diameters in 25cm to 35cm are the usual working range. The 2.5mm to 3.0mm range in 20cm to 30cm suits smaller donor sites. If the donor site is fibrous or has been operated on before, or you want a gentler cut, choose the one-end-sharp or both-end-bevel version instead. Match the fitting to the syringe, vacuum line or handpiece already in your theater.

Why Buy Direct From the Manufacturer

Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.

Choosing Between the Three Harvester Edge Types

Healermed makes this multiport harvester in three port-edge specifications. They share the same shaft, the same port layout and the same size grid; only the edges differ, and that difference sets where each one sits between harvest speed and how gently the parcels are cut.

Choose Your Fitting

Every fitting below carries the same multiport speed harvester both end sharp shaft, the same closed blunt tip and the same size grid. Pick the one that matches the syringe, vacuum line or handpiece already in your theater.

More Liposuction Cannulas and Accessories

Healermed manufactures the full range of cannulas for liposuction, from single hole finishing cannulas to high-flow debulking patterns, in 84 diameter and length combinations.

Frequently Asked Questions

What is a multiport speed harvester both end sharp liposuction cannula used for?

It is used to collect subcutaneous fat under vacuum for grafting and fat transfer. Ports sharpened at both ends cut parcels on the forward stroke and again on the return, so every complete hand movement harvests and a large graft volume is collected in less time at the donor site.

What is the difference between both-end-sharp and one-end-sharp harvesting cannulas?

On a both-end-sharp harvester every port has an edge at its leading and trailing end, so parcels are cut on the forward stroke and the return. On a one-end-sharp version only the forward stroke cuts. Both-end is faster; one-end gives the surgeon more control over what is divided and when.

Is this cannula autoclavable?

Yes. The instrument is fully reusable and can be steam autoclaved at 134°C. Flush the lumen and the opening with clean water immediately after use, remove all residue before sterilization, and dry completely. Inspect the opening edge under light at every cycle, since edge condition decides how the cannula behaves in tissue.

Which size should I use?

For high-volume harvesting from the abdomen, flanks and thighs, 3.0mm to 4.0mm diameters in 25cm to 35cm are the usual range. Use 2.5mm to 3.0mm in 20cm to 30cm for smaller donor sites. For fibrous or previously operated donor sites, the one-end-sharp or both-end-bevel versions give more control per pass.

What is the minimum order quantity for bulk orders?

The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes, fittings and quantities you need through the wholesale request page and we will confirm the minimum for that specification. This lets a small distributor start with a trial order and a larger importer scale up on the same terms.

Do you provide samples?

Yes. Samples are available on request and the buyer covers the shipping charges. Tell us the diameter and length you want to evaluate and we will confirm what can be sent. A sample also lets you run the anodized handle through your own sterilization protocol first.

Can I order a custom size?

Yes. Custom diameters, working lengths and opening dimensions are available on request in addition to the standard size grid. Send your specification through the wholesale request page and our production team will confirm what can be produced. Custom branding is also available for distributor and OEM orders.