Coleman Spoon Tip Injector Cannula – Stainless Steel Luer Lock

Liposuction Cannulas and Accessories › Coleman Spoon Tip Injector Cannulas › Coleman Spoon Tip Injector Cannula – Stainless Steel Luer Lock

The Coleman Spoon Tip Injector Cannula with Stainless Steel Luer Lock fitting is used to place fat in fat transfer and fat grafting. It is listed under Coleman Spoon Tip Injector Cannulas, part of the Healermed Liposuction Cannulas and Accessories range.

Coleman Spoon Tip Injector Cannula — Stainless Steel Luer Lock

Hub material decides how long a reusable injector stays usable. Anodized aluminium hubs are lighter and cheaper, but the coating fades and the thread can gall after repeated steam cycles. A solid stainless steel hub keeps its thread form far longer, which matters on an instrument that is screwed on and off a syringe many times in a single grafting case.

What the Spoon Tip Does

The working end is formed into a shallow scoop rather than finished as a plain closed nose, and the opening sits inside that scoop. The result is a tip that both parts tissue and directs where the graft goes as it withdraws.

The concave face is the feature. It presents a broader, flatter leading surface than a round nose, so the cannula slides along a plane rather than pushing into it, which is useful immediately under the skin where a round tip tends to dive or tent the surface. The surgeon keeps a shallow plane more easily.

The scoop also aims the delivery. Graft leaves into the hollow of the spoon and is directed to that side, so rotating the shaft places fat toward the skin or away from it with more definition than a plain side opening gives.

The trade is that a formed tip is a shaped surface. If the spoon is bent or flattened it stops holding a plane and stops directing the graft, and on a fine cannula that damage is easy to cause and impossible to correct.

How an Injector Cannula Places Fat

An injector cannula is the delivery end of a fat transfer. The syringe supplies the pressure, but where the graft ends up, and in what form, is decided by the cannula: its diameter, its opening, and the way the surgeon moves it.

Placement is done in retrograde. The cannula is advanced through the recipient plane, and fat is laid down as it is withdrawn, so the graft fills the tunnel the cannula has just made rather than being forced into tissue ahead of it. Each pass deposits a thread of fat. A result is built from many of those threads, crossed and layered, not from a few large boluses.

That is why the opening matters. Its size sets the diameter of the thread laid down; its position sets which way the fat is directed as the cannula withdraws; and its edge decides whether the parcel passes cleanly or is sheared at the exit. A wider opening places more per pass and fills faster; a smaller one places less and gives finer control in thin tissue where the graft can be seen through the skin.

Diameter and length work with it. A narrower cannula makes a smaller tunnel and allows finer layering, but it also raises injection pressure for the same fat, so the surgeon pushes harder. A longer shaft covers more of the recipient area from one entry point, which means fewer punctures. Matching all of this to the graft volume and the recipient site is the whole skill of the instrument choice.

Key Features

• ✔ Solid stainless steel Luer lock hub with no coating to wear off
• ✔ Scooped tip presents a broad flat leading face that holds a shallow plane
• ✔ Directs the graft to one side more definitely than a plain side opening
• ✔ Less tendency to dive or tent the skin than a round nose
• ✔ Blunt formed tip divides nothing on the way in

Specifications

Clinical Applications

• Superficial structural fat grafting just under the skin
• Periorbital and lip work where the plane must stay shallow
• Layered facial grafting with directional placement
• Fine work with the 1.0mm to 1.8mm diameters

Material and Sterilization

The cannula is made from German stainless steel with a passivated surface that resists corrosion and pitting through repeated cleaning cycles. It is reusable and can be steam autoclaved at 134°C. Flush the lumen and the opening with clean water immediately after use and dry fully before autoclaving. The spoon is a formed surface, so sight along it at each cycle to confirm it has not been bent or flattened. A deformed spoon no longer holds a plane or directs the graft, and cannot be corrected on a reusable instrument.

Why Buy Direct From the Manufacturer

Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.

Other Fittings for This Cannula

More From This Range

Other Injector Cannulas in the Range

Healermed manufactures the full set of fat transfer and injector cannulas, alongside the wider liposuction cannulas and liposuction accessories range.

Frequently Asked Questions

What is a coleman spoon tip injector cannula used for?

It is used to place fat immediately under the skin in structural fat grafting. The scooped tip holds a shallow plane rather than diving into it, and graft leaves into the hollow so the delivery is directed to one side as the cannula withdraws.

What is the advantage of a spoon tip over a round tip injector?

A round nose pushes into tissue and can dive or tent the skin in a shallow plane. A spoon tip presents a broad concave face that slides along the plane instead, and the hollow directs the graft to one side, giving more definite placement than a plain side opening.

Is this cannula autoclavable?

Yes. The instrument is fully reusable and can be steam autoclaved at 134°C. Flush the lumen and opening with clean water immediately after use, before graft residue sets, and dry completely before sterilization.

Which fitting should I order?

All four fittings are Luer lock types. Standard Luer lock suits most grafting syringes; stainless steel Luer lock is for high sterilization throughput; Super Luer Lock has a larger bore for lower injection resistance; universal Luer lock seats across syringe brands where consumable stock varies.

What is the minimum order quantity for bulk orders?

The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes, fittings and quantities you need through the wholesale request page and we will confirm the minimum for that specification.

Do you provide samples?

Yes. Samples are available on request and the buyer covers the shipping charges. Tell us the diameter and length you want to evaluate and we will confirm what can be sent. A sample also lets you run the steel hub through your own sterilization protocol before a bulk order.

Can I order a custom size?

Yes. Custom diameters, working lengths and opening configurations are available on request in addition to the standard size grid. Send your specification through the wholesale request page and our production team will confirm what can be produced.