Facelift Infiltration Cannula – Stainless Steel Luer Lock

The Facelift Infiltration Cannula with Stainless Steel Luer Lock is a blunt-tip, side-ported cannula used to deliver tumescent solution into the subcutaneous plane of the face and neck before facelift dissection, facial liposuction, or fat grafting. The hub is machined from solid stainless steel rather than a softer alloy, so the thread survives high-volume autoclave and cleaning cycles without wearing or discoloring. It suits busy surgical centers and is supplied in bulk to distributors worldwide. See the full Facelift Infiltration Cannulas range for other fittings.

This instrument is also known as a steel hub infiltration cannula, an all-metal Luer lock infiltrator, or a tumescent anesthesia cannula.

All-Steel Luer Lock Hub for High-Volume Autoclave Cycles

Hub material decides how long a reusable cannula stays usable. Anodized aluminum hubs are lighter and cheaper, but the anodized layer can fade and the thread can gall after repeated steam cycles. A solid stainless steel hub keeps its thread form and finish far longer, which matters in a center running several cases a day through the same instrument tray.

Key Features

• ✔ Solid stainless steel Luer lock hub — no anodized coating to wear off
• ✔ Fits standard Luer lock syringes and infiltration pump tubing
• ✔ Closed blunt distal tip with side ports for even solution spread
• ✔ Full size grid from 1.0mm x 4cm up to 6.0mm x 35cm
• ✔ Built for repeat sterilization in high-throughput theaters
• ✔ Custom diameters, lengths and port patterns available on request

Specifications

Clinical Applications

• Tumescent infiltration before facelift and neck lift
• Facial and submental liposuction preparation
• Fat grafting donor site infiltration
• High-volume clinics running repeated daily sterilization cycles

Material and Sterilization

Both the shaft and the hub are German stainless steel, passivated for corrosion resistance. The instrument is reusable and steam autoclavable to 134°C. Flush the lumen and side ports immediately after use and dry the cannula before autoclaving. Because the hub has no coating layer, mild staining can be cleaned back without damaging a finish, which is the main practical advantage over an anodized hub.

How to Choose

Choose this hub over the standard Luer lock version if your instruments go through several sterilization cycles a day or if aluminum hubs in your tray have already faded or seized. The cannula itself performs identically — the difference is durability of the connection, not clinical behavior. Diameter and length selection follows the same rule as the rest of the range: 1.0mm to 1.5mm in 5cm to 12cm for facial work, 1.8mm to 2.5mm in 15cm to 25cm for neck and small body areas, and 3.0mm and above for large-volume body infiltration.

Why Buy Direct From the Manufacturer

Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.

Related Instruments

Other fittings in the same cannula range:

• Facelift Infiltration Cannula – Luer Lock
• Facelift Infiltration Cannula – Super Luer Lock
• Facelift Infiltration Cannula – Threaded Fitting
• Facelift Infiltration Cannulas – All Fittings

Frequently Asked Questions

What is a stainless steel Luer lock cannula used for?

It is used to infiltrate tumescent or wetting solution into subcutaneous tissue before facelift, liposuction, or fat grafting. The stainless steel hub connects to standard Luer lock syringes and pump tubing, and is chosen where instruments are sterilized many times a day and hub durability matters as much as shaft quality.

What is the difference between a stainless steel hub and an aluminum hub cannula?

A stainless steel hub is machined solid metal with no surface coating; an aluminum hub is usually anodized for color and corrosion resistance. Over repeated autoclave cycles the anodized layer can fade and the thread can gall. Steel hubs keep their thread and finish longer, at the cost of slightly more weight.

Is this cannula autoclavable?

Yes. The instrument is fully reusable and can be steam autoclaved at 134°C. Flush the lumen and every side port with clean water immediately after use, remove all residue before sterilization, and dry completely. With no coating on the hub, routine cleaning will not strip a finish, so the connection stays smooth over long service life.

What is the minimum order quantity for bulk orders?

The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes and quantities you need through the wholesale request page and we will confirm the minimum for that specification. This lets a small distributor start with a trial order and a larger importer scale up on the same terms.

Do you provide samples?

Yes. Samples are available on request and the buyer covers the shipping charges. Tell us the diameter and length you want to evaluate and we will confirm what can be sent. Testing a sample before a bulk order is the fastest way to check hub machining, tip finish and port pattern against your own equipment.

Can I order a custom size?

Yes. Custom diameters, working lengths, and port patterns are available on request in addition to the standard size grid. Send your specification through the wholesale request page and our production team will confirm what can be produced. Custom branding is also available for distributor and OEM orders.