Single Hole Cannula MicroAire PAL Compatible

<p>The MicroAire PAL Compatible Standard Single Hole Liposuction Cannula is a blunt-tip aspiration cannula with one side opening and a hub built to fit MicroAire PAL power-assisted handpieces. The handpiece drives a short reciprocating stroke so the cannula advances with far less force, while the single opening keeps removal at one controlled point. It is listed under <a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas">Standard Single Hole Liposuction Cannulas</a>, part of the Healermed <a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories">Liposuction Cannulas and Accessories</a> range.</p>

<p>Buyers also search for this instrument as a one hole lipo cannula, a single port aspiration cannula, or a standard liposuction cannula.</p>

<div style="background-color:#f5f7fa;border-radius:8px;padding:16px;border-left:4px solid #14A8A3;">
  <p><strong>At a Glance</strong></p>
  <ul>
    <li><strong>Instrument type:</strong> Single hole liposuction aspiration cannula, reusable</li>
    <li><strong>Fitting:</strong> Compatible with MicroAire PAL power-assisted handpieces</li>
    <li><strong>Hole:</strong> One side opening</li>
    <li><strong>Tip:</strong> Closed blunt tip</li>
    <li><strong>Diameters:</strong> 1.0mm (19G) to 6.0mm (4G)</li>
    <li><strong>Working lengths:</strong> 3cm to 35cm</li>
    <li><strong>Material:</strong> German stainless steel</li>
    <li><strong>Sterilization:</strong> Steam autoclavable to 134&deg;C</li>
    <li><strong>Manufacturer:</strong> Healermed Instruments, Sialkot, Pakistan</li>
  </ul>
</div>

<h2>Power-Assisted Single Hole Cannula for PAL Handpieces</h2>

<p>Power-assisted liposuction changes how force reaches the tissue. The handpiece supplies the movement, so the surgeon's hand is left free to concentrate on direction and depth rather than on pushing. On a single hole cannula, where the whole point is knowing exactly where the aperture is, that division of work suits the instrument well.</p>

<h3>What a Single Hole Gives You</h3>
<p>One opening means the surgeon knows exactly where the fat is coming from. On a multi-port cannula the draw is spread along the shaft and the result is the sum of several openings working at once; the surgeon aims the instrument and reads the outcome afterwards. With a single hole, the aperture is a known point on a known side, and the removal happens there and nowhere else.</p>

<p>That precision is why the single hole cannula stays in the tray long after faster designs are bought. It is the instrument for the last ten percent of a case: taking down a small ridge, correcting one side that came out fuller than the other, or working a shallow pocket where a wider draw would take too much. It is also the standard teaching instrument, because the relationship between what the hand does and what the tissue does is direct enough to learn from.</p>

<p>The trade is speed. One opening moves less fat per pass than several, so a single hole cannula is the wrong tool for debulking a large area &mdash; that is what the multi-port designs are for. Most surgeons carry both and switch when the case moves from volume to refinement.</p>

<p>The distal tip is closed and rounded. It separates the plane by blunt dissection as the cannula advances, pushing vessels and nerves aside rather than dividing them, and the vacuum works through the side hole rather than the end of the shaft.</p>

<h3>Key Features</h3>
<ul>
  <li><span style="color:#14A8A3;">&#10004;</span> Hub built to fit MicroAire PAL power-assisted handpieces</li>
  <li><span style="color:#14A8A3;">&#10004;</span> Powered stroke frees the hand to concentrate on aperture placement</li>
  <li><span style="color:#14A8A3;">&#10004;</span> Shaft dimensioned for repeated reciprocating motion under vacuum</li>
  <li><span style="color:#14A8A3;">&#10004;</span> One opening &mdash; fat is removed from a known point on a known side</li>
  <li><span style="color:#14A8A3;">&#10004;</span> Direct relationship between hand movement and tissue response</li>
  <li><span style="color:#14A8A3;">&#10004;</span> Closed blunt tip separates the plane without cutting vessels or nerves</li>
  <li><span style="color:#14A8A3;">&#10004;</span> Deburred hole edge, the single surface that decides how the cannula cuts through fat</li>
  <li><span style="color:#14A8A3;">&#10004;</span> One-piece German stainless steel shaft, fully reusable</li>
  <li><span style="color:#14A8A3;">&#10004;</span> Custom diameters, lengths and hole positions available on request</li>
</ul>

<h3>Specifications</h3>
<table style="max-width:100%;border:1px solid #ddd;border-radius:6px;">
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Material</strong></td><td>German stainless steel</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Fitting</strong></td><td>MicroAire PAL compatible hub</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Hole</strong></td><td>One side opening</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Tip</strong></td><td>Closed blunt tip</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Diameters</strong></td><td>1.0mm (19G), 1.1mm (19G), 1.2mm (18G), 1.4mm (17G), 1.5mm (17G), 1.6mm (16G), 1.8mm (15G), 2.0mm (14G), 2.4mm (13G), 2.5mm (13G), 3.0mm (11G), 3.5mm (10G), 4.0mm (8G), 4.5mm (7G), 5.0mm (6G), 6.0mm (4G)</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Lengths</strong></td><td>3, 4, 5, 7, 7.5, 8, 9, 10, 12, 14, 15, 20, 25, 30, 35cm (by diameter)</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Reusable</strong></td><td>Yes &mdash; steam autoclavable to 134&deg;C</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Custom sizes</strong></td><td>Available on request</td></tr>
  <tr><td style="background-color:#0C2D6B;color:#ffffff;"><strong>Compliance</strong></td><td>FDA CGMP, ISO 13485, ISO 9001, CE Mark</td></tr>
</table>

<h3>Clinical Applications</h3>
<ul>
  <li>Final contouring and correction at the end of a liposuction case</li>
  <li>Taking down a small ridge or evening out an asymmetry</li>
  <li>Shallow pockets and small areas where a wider draw would remove too much</li>
  <li>Teaching and training, where a direct hand-to-tissue relationship matters</li>
</ul>

<h3>Material and Sterilization</h3>
<p>The cannula is made from German stainless steel with a passivated surface that resists corrosion and pitting through repeated cleaning cycles. It is reusable and can be steam autoclaved at 134&deg;C. Flush the lumen and the hole with clean water immediately after use and dry fully before autoclaving. On a single hole cannula the edge of that one opening does all the work, so inspect it under light at each cycle: a nicked or dulled edge changes how the instrument behaves, and there is no second port to compensate.</p>

<h3>How to Choose</h3>
<p>Order this fitting only if you already own a PAL power-assisted handpiece; the hub will not fit a syringe or a manual handle. Diameter sets how much fat comes out per pass and length sets the reach. For general body work the 3.0mm to 4.0mm diameters in 25cm to 35cm are the usual range, though a single hole cannula in those sizes is normally a finishing instrument rather than the one used for bulk removal. The 2.0mm to 2.5mm range in 15cm to 25cm covers arms, the neck and most correction work, which is where this cannula is chosen most often. The 1.0mm to 1.5mm diameters in 5cm to 12cm are for facial and submental work. Match the fitting to the syringe, vacuum line or handpiece already in your theater.</p>

<div style="background-color:#f5f7fa;border-left:5px solid #0C2D6B;border-radius:8px;padding:16px;margin:16px 0;">
  <p><strong style="color:#0C2D6B;">Buying for your practice?</strong> Order online at factory-direct prices, straight from the manufacturer &mdash; no distributor markup.</p>
  <p><a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas" style="display:inline-block;background-color:#0C2D6B;color:#ffffff;padding:10px 18px;border-radius:6px;">Shop Online</a></p>
</div>

<div style="background-color:#f5f7fa;border-left:5px solid #14A8A3;border-radius:8px;padding:16px;margin:16px 0;">
  <p><strong style="color:#0C2D6B;">Distributor, importer, or hospital group?</strong> Get bulk pricing, OEM manufacturing, and custom branding on the full cannula range.</p>
  <p><a href="https://healermedinstruments.com/wholesale-bulk-orders" style="display:inline-block;background-color:#14A8A3;color:#ffffff;padding:10px 18px;border-radius:6px;">Request Wholesale Price</a></p>
</div>

<h3>Why Buy Direct From the Manufacturer</h3>
<p>Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.</p>
<p style="background-color:#f5f7fa;border-left:4px solid #0C2D6B;border-radius:6px;padding:12px;"><strong>Trademark notice:</strong> MicroAire and PAL are trademarks of MicroAire Surgical Instruments LLC. Healermed Instruments is not affiliated with, endorsed by, or sponsored by MicroAire. This cannula is an independently manufactured instrument and the compatibility reference is provided for the buyer's guidance only.</p>

<h3>Related Instruments</h3>
<p>Other fittings in the same cannula range:</p>
<ul>
  <li><a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas/single-hole-liposuction-cannula-lumsail-compatible">Standard Single Hole Liposuction Cannula &ndash; Lumsail Compatible</a></li>
  <li><a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas/single-hole-cannula-fixed-power-handle">Standard Single Hole Liposuction Cannula &ndash; Fixed Power Handle</a></li>
  <li><a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas/toomey-hub-single-hole-liposuction-cannula">Standard Single Hole Liposuction Cannula &ndash; Toomey Hub, 60cc</a></li>
  <li><a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas/standard-single-hole-liposuction-cannula">Standard Single Hole Liposuction Cannula &ndash; main product page</a></li>
  <li><a href="https://healermedinstruments.com/liposuction-cannulas-and-accessories/standard-single-hole-liposuction-cannulas">Standard Single Hole Liposuction Cannulas &ndash; all fittings</a></li>
</ul>

<h3>Frequently Asked Questions</h3>

<p><strong style="color:#0C2D6B;">What is a power-assisted single hole liposuction cannula used for?</strong></p>
<p>It is used to remove subcutaneous fat under vacuum when the cannula is driven by a reciprocating handpiece instead of by hand. The powered stroke supplies the movement, leaving the surgeon to concentrate on where the single aperture is pointing and how deep it sits.</p>

<p><strong style="color:#0C2D6B;">What is the difference between a single hole and a multi-port liposuction cannula?</strong></p>
<p>A single hole cannula has one opening and removes fat from one known point; a multi-port cannula has several and clears volume faster from a wider area. Single hole suits precision work, small corrections and teaching. Multi-port suits debulking large areas where speed matters more than pinpoint control.</p>

<p><strong style="color:#0C2D6B;">Is this cannula autoclavable?</strong></p>
<p>Yes. The instrument is fully reusable and can be steam autoclaved at 134&deg;C. Flush the lumen and the hole with clean water immediately after use, remove all residue before sterilization, and dry completely. Inspect the hole edge each cycle, since on a single hole cannula that one edge determines how the instrument performs.</p>

<p><strong style="color:#0C2D6B;">What is the minimum order quantity for bulk orders?</strong></p>
<p>The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes, fittings and quantities you need through the wholesale request page and we will confirm the minimum for that specification. This lets a small distributor start with a trial order and a larger importer scale up on the same terms.</p>

<p><strong style="color:#0C2D6B;">Do you provide samples?</strong></p>
<p>Yes. Samples are available on request and the buyer covers the shipping charges. Send us your handpiece details with the diameter and length you want to evaluate. Testing a sample in your own handpiece before a bulk order is strongly recommended for any powered fitting.</p>

<p><strong style="color:#0C2D6B;">Can I order a custom size?</strong></p>
<p>Yes. Custom diameters, working lengths and hole positions are available on request in addition to the standard size grid. Send your specification through the wholesale request page and our production team will confirm what can be produced. Custom branding is also available for distributor and OEM orders.</p>