Flap Dissector Liposuction Cannula – Toomey Hub 60cc

Liposuction Cannulas and Accessories › Flap Dissector Liposuction Cannulas › Flap Dissector Liposuction Cannula – Toomey Hub 60cc

The Flap Dissector Liposuction Cannula with Toomey Hub 60cc fitting is supplied with a hub built for that equipment, carrying the same shaft and tip as every other fitting in the range. It is listed under Flap Dissector Liposuction Cannulas, part of the Healermed Liposuction Cannulas and Accessories range.

Surgeons also search for this instrument as a flap dissector cannula, a spatula dissector, a tissue plane dissector, or a blunt flap elevator cannula.

Flap Dissector Liposuction Cannula — Toomey Hub 60cc

A Toomey tip is a wide-bore syringe fitting rather than a Luer taper. It exists because aspirated tissue is thick and moves slowly through a narrow connector, and a matching hub keeps the whole path wide.

What a Flap Dissector Does

A flap dissector raises tissue planes. The working end is flattened into a broad, blunt spatula rather than drawn to a point or a V, and the shaft behind it is solid: there are no ports and nothing is aspirated through this instrument.

The flat head is the whole design. A round cannula separates tissue along a narrow line, so raising a wide plane with one means many parallel passes that have to be joined up afterwards, and the joins are where irregularity comes from. A broad flat head opens the plane across its full width in a single sweep, so the flap lifts evenly and at one consistent depth.

Depth control is the second gain. A flat head naturally follows the plane it is in, because the wide face resists tipping up or down in a way a round shaft does not. The surgeon sets the level once and the instrument tends to hold it, which matters when the flap being raised is thin and the layer above it has to survive.

It is blunt on every surface. It separates by spreading and lifting, pushing perforators, nerves and fibrous attachments aside rather than dividing them, which is what allows it to be used under a flap where a sharpened instrument would risk the blood supply. Where an attachment will not yield, it is released deliberately with a sharp dissector rather than forced with this one.

Key Features

• ✔ Toomey hub matched to standard 60cc Toomey-tip syringes
• ✔ Broad flattened blunt head opens a tissue plane across its full width in one sweep
• ✔ Wide face resists tipping, so the plane is held at a consistent depth
• ✔ Solid shaft with no ports — raises the plane, aspirates nothing
• ✔ Blunt on every surface: spreads and lifts rather than dividing perforators or nerves
• ✔ Usable under a thin flap where a sharpened dissector would risk the blood supply
• ✔ One-piece German stainless steel construction, fully reusable and autoclavable
• ✔ Custom head widths, diameters and lengths available on request

Specifications

Clinical Applications

• Raising and separating tissue flaps during body contouring
• Opening wide planes before liposuction or fat grafting
• Undermining in abdominoplasty and body lift procedures
• Facial and neck plane dissection with the smaller head widths

How to Choose

The Toomey fitting starts at 2.0mm, so for finer work below 2.0mm choose the Luer lock version instead. Head width and shaft length matter more than diameter on this instrument, because the head sets how much plane each sweep opens. Wider heads on the 3.0mm to 4.0mm shafts in 25cm to 35cm suit abdominal and body flap work, where the plane is large and the reach is long. Narrower heads on the 2.0mm to 2.5mm shafts in 15cm to 25cm suit the face, neck and arms. Tell us the plane you are raising and we will confirm the head width that fits it.

Material and Sterilization

The instrument is made from German stainless steel with a passivated surface that resists corrosion and pitting through repeated cleaning cycles. It is reusable and can be steam autoclaved at 134°C. Clean immediately after use and dry fully before autoclaving. A flat head has no lumen but its faces and edges trap tissue against the shaft junction, so brush that junction specifically and inspect the whole head under light at every cycle. Sight along the head to confirm it has not been bent, since a distorted head no longer follows a plane evenly and cannot be corrected on a reusable instrument.

Why Buy Direct From the Manufacturer

Manufactured by Healermed Instruments, a surgical instruments manufacturer and exporter based in Sialkot, Pakistan. Factory-direct pricing removes the importer and distributor layer. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and custom branding are available for distributor and brand-owner orders.

Other Fittings for This Cannula

More Liposuction Cannulas and Accessories

Frequently Asked Questions

What is a flap dissector liposuction cannula used for?

It is used to raise and separate tissue flaps and planes during body contouring, liposuction and reconstructive procedures. The broad flattened blunt head opens the plane across its full width as it sweeps, lifting the flap evenly at one depth while pushing perforators and fibrous attachments aside rather than dividing them.

What is the difference between a flap dissector and a V-dissector?

A V-dissector has a narrow V tip that splits tissue along a line and travels between the halves, which suits pre-tunnelling a route. A flap dissector has a broad flattened head that opens a plane across its full width in one sweep, which suits raising a flap evenly. Both are blunt; they open different shapes of space.

Is this instrument autoclavable?

Yes. It is fully reusable and can be steam autoclaved at 134°C. Clean immediately after use, remove all residue before sterilization, and dry completely.

Which size should I use?

Wider heads on 3.0mm to 4.0mm shafts in 25cm to 35cm suit abdominal and body flap work where the plane is large and the reach is long. Narrower heads on 2.0mm to 2.5mm shafts in 15cm to 25cm suit the face, neck and arms. Head width matters more than shaft diameter here, since the head sets how much plane each sweep opens.

What is the minimum order quantity for bulk orders?

The minimum order quantity is agreed per order rather than set at a fixed number. Send us the sizes, fittings and quantities you need through the wholesale request page and we will confirm the minimum for that specification.

Do you provide samples?

Yes. Samples are available on request and the buyer covers the shipping charges. Testing a sample first confirms the hub seats correctly on the 60cc syringes you already stock.

Can I order a custom size?

Yes. Custom diameters, working lengths and configurations are available on request in addition to the standard size grid. Send your specification through the wholesale request page and our production team will confirm what can be produced.