Shea-Bellucci Micro Ear Scissors

ENT Surgical Instruments › Ear Surgery Instruments › Shea-Bellucci Micro Ear Scissors

Shea-Bellucci Micro Ear Scissors are fine cutting scissors for ear surgery under the operating microscope. The Shea-Bellucci pattern follows the Bellucci design with longer 8mm blades and an 8cm working length. Healermed makes them in four blade directions — straight, bent up, bent right and bent left. They are part of our micro ear scissors range, alongside Wullstein Micro Ear Scissors and Bellucci Micro Ear Scissors, under Ear Surgery Instruments and ENT Surgical Instruments.

Shea-Bellucci Micro Ear Scissors, 8mm Blades, in Four Directions

Full Micro Ear Scissors Range

All 12 scissors. Blade length = cutting size. Click a model code to open it, or a pattern name to see that pattern.

Compare the Three Patterns

The Four Blade Directions

• Shea-Bellucci straight, 8mm — HM-SB-S80. The blades are straight, so they cut in line with your view down the ear canal.
• Shea-Bellucci bent up, 8mm — HM-SB-UP80. The blades are bent upward, so they cut above the line of the shaft while your view stays clear.
• Shea-Bellucci bent right, 8mm — HM-SB-R80. The blades are bent to the right, so they cut to the right of the shaft without moving the instrument across the view.
• Shea-Bellucci bent left, 8mm — HM-SB-L80. The blades are bent to the left, so they cut to the left of the shaft without moving the instrument across the view.

About the Shea-Bellucci Pattern

Longer blades cut a longer line in one closure. That means fewer cuts when opening skin flaps in the ear canal or trimming a fascia graft, and a straighter, cleaner edge.

The trade-off is space. Longer blades need more room to open, so for the tightest spots close to the ossicles the 4mm Bellucci or Wullstein is the better choice.

Compare with the Wullstein Micro Ear Scissors and the Bellucci Micro Ear Scissors, in the tables above.

What Micro Ear Scissors Are Used For

Ear surgery happens through a canal less than a centimetre wide, under a microscope. Normal scissors cannot fit, and their handles would block the view. Micro ear scissors solve both problems: tiny blades at the end of a long, thin shaft, worked from a handle that stays outside the ear.

Surgeons use them to cut the ear canal skin and lift flaps, trim fascia and perichondrium grafts in tympanoplasty, cut the stapedius tendon in stapes surgery, and divide adhesions and scar bands in the middle ear. Because the tissue is thin and close to the hearing bones, the blades must cut cleanly to the very tip without tearing.

Bellucci, Shea-Bellucci or Wullstein?

• Wullstein — 4mm blades, 9cm working length: deeper reach with a 9cm working length
• Bellucci — 4mm blades, 8cm working length: everyday precise cutting, the standard pattern
• Shea-Bellucci — 8mm blades, 8cm working length: longer cuts in one closure with 8mm blades

Straight or Curved Micro Ear Scissors?

• Straight — cutting in line with the view: ear canal skin, grafts and soft tissue
• Bent Up — cutting above the line of view, toward the attic
• Bent Right — side cuts to the right in the ear canal and middle ear (used as a pair with the left)
• Bent Left — side cuts to the left in the ear canal and middle ear (used as a pair with the right)

A complete set is a straight, a bent up, and a bent right and left pair in the pattern you prefer.

Specifications

Clinical Uses

• Cutting ear canal skin and tympanomeatal flaps
• Trimming fascia and perichondrium grafts in tympanoplasty
• Cutting the stapedius tendon in stapes surgery
• Dividing adhesions and fibrous bands in the middle ear
• Cutting mucosa and cholesteatoma matrix
• Tympanoplasty, stapes and middle ear surgery

Care and Sterilization

Micro scissors blades are fine and lose their edge if misused. Cut soft tissue only — never wire, bone or needles. Store with the blades closed in a tip guard, and test the cut on a wet gauze strand: blunt scissors tear tissue instead of cutting it. Clean the instrument straight after use, before blood and tissue dry on the tip. Use a soft brush and an ultrasonic cleaner, rinse, and dry fully. Put a drop of instrument lubricant on the joint before sterilizing. Steam autoclave at up to 134°C in a tray with a silicone mat or tip guard, so the fine tip never knocks against other instruments. Check the tip under magnification at every cycle.

Why Buy Direct From the Manufacturer

Made by Healermed Instruments, a surgical instrument manufacturer and exporter in Sialkot, Pakistan. Buying from the factory removes the importer and distributor margin. Production runs under an ISO 13485 and FDA CGMP quality system, with ISO 9001 and CE Mark certification. OEM manufacturing and private-label branding are available for distributors and brand owners.

Complete Ear Surgery Instrument Range

Every Healermed micro ear instrument, grouped by category. Part of the Ear Surgery Instruments range under ENT Surgical Instruments.

Micro Ear Forceps · 15 sizes · Straight, bent up, right and left jaws in 3 tip sizes

Straight Smooth 4x0.8mm Straight Serrated 4x0.8mm Bent Up Serrated 4x0.8mm Angled Right Serrated 4x0.8mm Angled Left Serrated 4x0.8mm Straight Smooth 4x0.6mm Straight Serrated 4x0.6mm Bent Up Serrated 4x0.6mm Angled Right Serrated 4x0.6mm Angled Left Serrated 4x0.6mm Straight Smooth 3.5x0.6mm Straight Serrated 3.5x0.6mm Bent Up Serrated 3.5x0.6mm Angled Right Serrated 3.5x0.6mm Angled Left Serrated 3.5x0.6mm

Micro Ear Cup Forceps · 8 sizes · Straight, bent up, right and left cups in 2 sizes

Cup Straight 4x1mm Cup Bent Up 4x1mm Cup Bent Right 4x1mm Cup Bent Left 4x1mm Cup Straight 3.5x0.6mm Cup Bent Up 3.5x0.6mm Cup Bent Right 3.5x0.6mm Cup Bent Left 3.5x0.6mm

Micro Ear Nippers · 4 sizes · House-Dieter malleus nippers, 4 cutting directions

Malleus Nipper Up Malleus Nipper Down Malleus Nipper Right Malleus Nipper Left

Wire Bending Forceps · 2 sizes · McGee forceps for stapes prosthesis wire

McGee 3.5mm Tip McGee 6mm Tip

Fuller Prosthesis Introducing Forceps · 1 size · Holds and places a middle ear prosthesis

Fuller 7mm Tip

Wullstein Micro Ear Scissors · 4 items · 4mm blades, 9cm, straight, up, right, left

Wullstein Straight Wullstein Bent Up Wullstein Bent Right Wullstein Bent Left

Bellucci Micro Ear Scissors · 4 items · 4mm blades, 8cm, straight, up, right, left

Bellucci Straight Bellucci Bent Up Bellucci Bent Right Bellucci Bent Left

Shea-Bellucci Micro Ear Scissors · 4 items (this category) · 8mm blades, 8cm, straight, up, right, left

Shea-Bellucci Straight Shea-Bellucci Bent Up Shea-Bellucci Bent Right Shea-Bellucci Bent Left

Looking for nose or throat instruments? Browse all ENT Surgical Instruments, or go back to Ear Surgery Instruments.

Frequently Asked Questions

What are micro ear scissors?

Fine surgical scissors with very small blades on a long, thin shaft, used to cut soft tissue in ear surgery under the operating microscope. The handle stays outside the ear so the view stays clear.

Which micro ear scissors should I buy first?

A straight Bellucci. Then add a bent up and a bent right and left pair, and a straight Shea-Bellucci for longer cuts.

What are Shea-Bellucci micro ear scissors used for?

They cut soft tissue in ear surgery under the microscope: ear canal skin and flaps, grafts, adhesions and small tendons such as the stapedius tendon.

Which direction should I buy?

Start with the straight. Add bent up for cuts above the line of view, and a bent right and left pair for side cuts. A full set is all four.

What is the difference between Bellucci, Shea-Bellucci and Wullstein?

Bellucci: 4mm blades, 8cm, the standard pattern. Shea-Bellucci: 8mm blades for longer cuts. Wullstein: 4mm blades on a 9cm shaft for more reach.

What does the model code mean?

HM-SB, then the direction (S straight, UP bent up, R bent right, L bent left), then the blade length in tenths of a millimetre. HM-SB-UP80 is Shea-Bellucci, bent up, 8mm blades.

Are these scissors autoclavable?

Yes. They are reusable and can be steam autoclaved at up to 134°C.

What is the minimum order quantity for bulk orders?

The minimum order is agreed per order, not fixed. Send the model codes and quantities you need through the wholesale request page and we confirm the minimum for that order.

Do you provide samples?

Yes. Samples are available on request and the buyer pays the shipping. Tell us the model codes you want to check.

Can I order a custom size?

Yes. Other tip lengths, tip widths and working lengths can be made on request. Send your specification through the wholesale request page and our production team will confirm.